Com-Central.net

Need a little help
The AFV ASSOCIATION was formed in 1964 to support the thoughts and research of all those interested in Armored Fighting Vehicles and related topics, such as AFV drawings. The emphasis has always been on sharing information and communicating with other members of similar interests; e.g. German armor, Japanese AFVs, or whatever.
Go to page 1, 2 Next

Forum Index › AFV News Discussion Board

View previous topic :: View next topic

Author

Message

Joe_D
Power User

Offline
Joined: Jan 29, 2006
Posts: 2067
Location: Razorback Country

Posted: Sat Mar 24, 2007 4:26 pm
Post subject: Need a little help

Hi everyone,
I am working on another puzzle and could use a little help from this esteemed board Smile

. I sure could use the serial numbers (not registration/USA) from the following tanks if possible. Neil has already helped by posting the serial number from the M60A2 at Aberdeen.

M60A2 located at the Fort Knox Museum (Dontos?? Wink

)
M60A2 in the Littlefield Collection California (Toadman??? Wink

)
M60A2 located in the Danville Virginia collection

I believe those should not be that hard to get (I hope).

The last two might be harder since they are out door monuments/displays.

M60A2 Located at the American Legion Post at Bradyâ€™s Bend, East Brady PA
M60A2 Located at the American Veterans Post 136, 614 South State Street, Ephrata PA

I am not holding out much hope for the 2 located at Aberdeen since I don't think they are available for public viewing and I haven't seen any pictures of either. Believe it or not that's all that's left of them that I know of Shocked

.

The numbers should all be 4 digits located on the left front tow eye (Driver's view) and left rear hull/deck just above the fender below the 3 deck securing bolts.

Any help would be greatly appreciated,

Joe D

toadmanstankpictures
Power User

Offline
Joined: Jan 24, 2006
Posts: 704

Posted: Sat Mar 24, 2007 6:15 pm Post subject: Re: Need a little help
Joe, I should be able to get the s/n off of Littlefield's in a couple weeks. _________________ Chris "toadman" Hughes www.toadmanstankpictures.com www.cafepress.com/toad...ksandstuff

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Sat Mar 24, 2007 10:36 pm Post subject: Re: Need a little help
Joe, you mean there are another 2 M60A2s at Aberdeen, "behind the fence" (ie the testing areas) I presume? Did you originally know of 3 at APG, because I know the one I gave you info on was previously behind the fence. Neil

bsmart
Power User

Offline
Joined: Jan 23, 2006
Posts: 2523
Location: Central Maryland

Posted: Sat Mar 24, 2007 11:26 pm Post subject: Re: Need a little help
Joe - If there is more than one at Aberdeen do you think the Museum owns the second one? Ephrata isn't too far drom Lancaster, Maybe I can talk my wife into a day trip to Pa Dutch country this spring. And East Brady looks within 45 minutes of so of my daughters place so maybe on a trip up there I can getby there. No promises right now but ... _________________ Bob Smart ([email protected])

Dontos
Power User

Offline
Joined: Jan 24, 2006
Posts: 3436
Location: Vine Grove, KY

Posted: Sat Mar 24, 2007 11:32 pm
Post subject: Re: Need a little help

Hi everyone,

M60A2 located at the Fort Knox Museum (Dontos?? )

No Problem....

Believe it or not that's all that's left of them that I know of .

BTW: What about the M60A2 on Zussman Range ??

Hey now that I'm thinking about it...... There are also several M113 Mortar tracks ( 4, I think..) as well as two V100 or V150's. Its been a couple of years since I was last up there, But they were definitely onsite.

The M60A2 is a turret mounted on an M48(A ? ) chassis. It is 'wired' and used actively. Although it isn't operational, the turret and hoffman devise are operated by remote control.

Don

_________________
"Gonna hold my breath until Armor returns home..."

Joe_D
Power User

Offline
Joined: Jan 29, 2006
Posts: 2067
Location: Razorback Country

Posted: Sun Mar 25, 2007 4:47 am
Post subject: Re: Need a little help

Uhh, I'm sorry Neil, Bob, I meant Anniston, not Aberdeen

,
That's what happens when you stay up too late.

Dontos,
I really can't use anything off the Zussman tank because it's actually an M48(A0/A1) with an M60A2 turret. The same applies to the Valley Station KY tank and the one that was at the GMD range at Knox (Possibly now the Zussman Tank). I use hulls as an ID reference, since the turrets are always swapped around or removed for conversions (M60A3, AVLB's, ROBAT, BMP-3 VISMOD etc).

Toadman,
Thanks in advance, and on a side note I could use confirmation on his other M60's. the A0 and A1 that he has. Please check your PM too.

Bob,
Does your wife ever say "What's the REAL reason you are wanting to make this trip?" whenever you propose them??? Laughing

BTW I found what's left of M60A2 SN 4427 here in Iraq, picture to be posted later,

Thanks everyone,
Joe D

bsmart
Power User

Offline
Joined: Jan 23, 2006
Posts: 2523
Location: Central Maryland

Posted: Sun Mar 25, 2007 11:29 am
Post subject: Re: Need a little help

An A2 in Iraq? Did we suppy some of them to Iran? (That is the only way I can think of one getting there)

Oh and no she doesn't ask because I tell her when we are thinking about it. Day trips to Lancaster usually happen about twice a year; Outlets in Lancaster, Chow-Chow at the PA Dutch village in Intercourse, And pick up some fantastic Raisin and Cinnamon Bread at a Bakery on the way

(It is only open Weds-Fri but we found a farmers market that carries their bread on the weekend)

As far as going up to my daughters we have a wedding coming up at the end of July and I know there is at least one trip up there for a shower. My Wife can go to that and the future son-in law, his father (a Viet war vet) and I can run off for the afternoon.

Mission planning, making sure ther is something in it for everyone,that's the trick Wink

_________________
Bob Smart ([email protected])

Joe_D
Power User

Offline
Joined: Jan 29, 2006
Posts: 2067
Location: Razorback Country

Posted: Sun Mar 25, 2007 5:44 pm
Post subject: Re: Need a little help

Hi Bob,

An A2 in Iraq? Did we suppy some of them to Iran? (That is the only way I can think of one getting there)

No, no such thing, it's actually an AVLB made from an A2 hull, that's why I said what's left of one. Found two at a FOB a ways South from Baghdad. Pretty much abandoned or if not in a very sorry state of repair.

Sounds like you are all over it with the mission planning. I figure after about 3-4 months after I get home mine will be up for a few road trips.

Joe D

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Sun Mar 25, 2007 7:06 pm Post subject: Re: Need a little help
- Joe_D I use hulls as an ID reference, since the turrets are always swapped around or removed for conversions (M60A3, AVLB's, ROBAT, BMP-3 VISMOD etc). Joe, is the ROBAT still around somewhere? Neil

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Sun Mar 25, 2007 7:06 pm Post subject: Re: Need a little help
According to Ron Fry, â€œRusting Away in the USA,â€? Military Machines International, Vol. 6, No. 4 (September 2006) there are 2 M60A2s on the ranges at Fort Knox - ie in the areas you can hunt in... Neil

MarkHolloway
Power User

Offline
Joined: Apr 08, 2006
Posts: 2054
Location: Beatty, Nevada

Posted: Sun Mar 25, 2007 8:01 pm Post subject: Re: Need a little help
So was the M247 Sgt York made from an A2 hull? If so, was the serial numbers changed? _________________ "TUMBLEWEED"

bsmart
Power User

Offline
Joined: Jan 23, 2006
Posts: 2523
Location: Central Maryland

Posted: Sun Mar 25, 2007 9:05 pm Post subject: Re: Need a little help
I thought the Sgt York was made from an M48 hull. I'll have to look at the one at Aberdeen next week _________________ Bob Smart ([email protected])

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Sun Mar 25, 2007 9:11 pm Post subject: Re: Need a little help
Yeah, its an M48 hull - or at least should be, unless someone got the idea to put a Sergeant York turret on an M60 hull... Neil

Dontos
Power User

Offline
Joined: Jan 24, 2006
Posts: 3436
Location: Vine Grove, KY

Posted: Mon Mar 26, 2007 8:28 am
Post subject: Re: Need a little help

- Neil_Baumgardner

According to Ron Fry, â€œRusting Away in the USA,â€? Military Machines International, Vol. 6, No. 4 (September 2006) there are 2 M60A2s on the ranges at Fort Knox - ie in the areas you can hunt in...

Neil

.....hmmmm, maybe I need to look into a new hobby,.....and perhaps 'go hunting'.....

(Why do I get this image of Elmer Fudd,....??!?)

(Shhhhh......I'm hunting for WABBIT....!!!!)

Don

_________________
"Gonna hold my breath until Armor returns home..."

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Mon Mar 26, 2007 10:20 am Post subject: Re: Need a little help
I'll see if I can take some pictures or scans of the article tonight... Neil

Forum Index › AFV News Discussion Board
Page 1 of 2

All times are GMT - 6 Hours
Go to page 1, 2 Next

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big