Com-Central.net

geoffsteer · ***Power User*** Offline Joined: Jan 24, 2006 Posts: 114

Hi Guys-
Tiny rubble? I mean small granular rubble like chunks of coal. I would guess that a contact cement would be poured into the area and the rubble thrown on to the glue. Its the next step I'm wondering about. That step being, once the rubble is glued down how do add more glue so you can create a small heap/pile of rubble? It seems to me that this next step would be tricky as you would be putting that contact cement on top of the first initial pile of rubble, hard to do without disturbing it. So, what do you guys do?
With thanks-
Geoff Steer [;-{/)

JG300-Ascout

Geoff,
When I've done something like this, I use my "universal" adhesive, diluted Borden's white glue. It's pourable, yet dries as usual...for your "pile", I'd experiment with making a slurry of the gravel (or pre-fabbing a "mound" with paper mache using....Yep!, Borden's diluted white glue or clay, and sticking the final layer over that). Repeat as necessary for complete coverage.
I use flat pastel artists chalks to get the flat look, since where the dried glue shows may be a little shiny.

I like white glue because you can moderate the consistancey, and it's water soluble so cleanup is easy.

I'm sure there are alternate, and better methods, but that's what I'd do.

Dave_Block · ***Power User*** Offline Joined: Jan 24, 2006 Posts: 32

A minor variation on Ascout's great tip, check out the RR section of the hobby shop for Woodlands Scenics 'Scenic Cement'. It looks remarkably like thinned down Borden's white glue but has the advantage of drying to a matte finish (make sure it has 'matte formula' on the label). It can be hand-brushed or sprayed with a pump sprayer, not recommended for your airbrush. Use an eye-dropper for tight spaces.
HTH, Dave

David_Reasoner

I've used Ascout's diluted white glue method to build model stone fences in both 1/72 and 1/285 scales. Just have to allow each "layer" of stone to set up a bit before applying the next one. Once everything has thoroughly dried you can apply washes or dry-brushing to get the final appearance you want.

David

geoffsteer · ***Power User*** Offline Joined: Jan 24, 2006 Posts: 114

Hi Guys-
Thanks for the suggestions! I've ordered the Woodlands Scenics 'Scenic Cement' from my local hobby shop.
Thanks again-
Geoff Steer

Kurt_Laughlin · ***Power User*** Offline Joined: Jan 24, 2006 Posts: 577

MR magazine is running a series on a beginner's layout construction. The last issue that came by subscription told how to attach track ballast. I forget the exact method but it was new to me and specifically avoided the semi-gloss overcoat you get from spraying diluted glue over placed ballast.

. . . So check a newsstand.

KL

Dontos

'Back in the day' Rolling Eyes

... when I did a few diarammas, I used 'wood putty' or 'wood filler'. It hardens realistically and can be molded, shaped, and painted.

Don't know if there is anything in the hobby shops like that, but it worked for me, with good results.

Com-Central.net

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big