Com-Central.net

Live from RMP
The AFV ASSOCIATION was formed in 1964 to support the thoughts and research of all those interested in Armored Fighting Vehicles and related topics, such as AFV drawings. The emphasis has always been on sharing information and communicating with other members of similar interests; e.g. German armor, Japanese AFVs, or whatever.

Forum Index › AFV News Discussion Board

View previous topic :: View next topic

Author

Message

Dontos
Power User

Offline
Joined: Jan 24, 2006
Posts: 3436
Location: Vine Grove, KY

Posted: Wed Jan 06, 2010 3:46 pm Post subject: Live from RMP
Hey All Doing a test run today, viewing CK live. Using my Yahoo Messenger for now, Will be streaming for the next few hours as I'm working on the track. Check it out & let me know how it works. Regards Don

Dontos
Power User

Offline
Joined: Jan 24, 2006
Posts: 3436
Location: Vine Grove, KY

Posted: Wed Jan 06, 2010 5:53 pm Post subject: Re: Live from RMP
Well Trying to work on breaking CKs track. Being a little difficult since we have no end connector puller for this type of track, soooooo. Its all manual labor with the sledge hammers and 'tankers bar'. JOE D,....where are you when I need you??? I'll be here for several more hours and will check in on occassion. I'm recording and getting photos and will post some later. Regards Don

TrevorLarkum
Power User

Offline
Joined: Sep 16, 2007
Posts: 1596
Location: Northampton, England

Posted: Wed Jan 06, 2010 9:28 pm Post subject: Re: Live from RMP
- Dontos I'm recording and getting photos and will post some later. Looking forward to it. _________________ Trevor Dr Trevor Larkum Preserved Tanks: PreservedTanks.com Armour Archive: ArmourArchive.co.uk EVs

Dontos
Power User

Offline
Joined: Jan 24, 2006
Posts: 3436
Location: Vine Grove, KY

Posted: Wed Jan 06, 2010 10:08 pm
Post subject: Re: Live from RMP

Todays test was successful. Continuity & reception is sufficient to webcast from RMP.

Apoligies for using a 'sub-standard' means, but it was merely a step to possible future webcast events with s better provider. I had to insure my end was workable.

As for todays work results,.....I was stumped by old track, that refused to 'break'. Oh well, not every work session can be productive, but with an upcoming Saturday work day, I am confident of better results

Regards
Don

Dontos
Power User

Offline
Joined: Jan 24, 2006
Posts: 3436
Location: Vine Grove, KY

Posted: Fri Jan 08, 2010 2:35 pm Post subject: Re: Live from RMP
Here are a couple of stills from the webcam. The last photo is of the two 'tank dollys' which will be placed under CK to enable movement of the Hull following the removal of the track & suspension. I should be in RMP tomorrow (Saturday), for a Volunteer Workday. I'll have a similiar set up to broadcast and perhaps can do a real time, 'question & answer' requests or session. Regards Don

Garry_Redmon
Power User

Offline
Joined: Jan 24, 2006
Posts: 398
Location: Kentucky

Posted: Fri Jan 08, 2010 10:43 pm Post subject: Re: Live from RMP
Don, How do people view your web cam? I went to my Yahoo account and saw that you were online, but I didn't see how to view live. If there is a link, I'll put it up on AFTA tonight since I will be at RMP tomorrow. Garry _________________ armorfortheages.com/

Dontos
Power User

Offline
Joined: Jan 24, 2006
Posts: 3436
Location: Vine Grove, KY

Posted: Sun Jan 10, 2010 10:52 pm
Post subject: Re: Live from RMP

Well, the second webcast session attempt became a non-event due to 'technical difficulties'.

Work on CK progressed amazingly well. We were able to 'break' both sides of track. Using 20 ton jacks, lifted CK into the air and then positioned the 'tank dolly', beneath the hull. Both tracks were then removed to end out a 6-7 hour work session.

Garry should have some additional coverage with updates to AFTA.

Regards
Don

Forum Index › AFV News Discussion Board
Page 1 of 1

All times are GMT - 6 Hours

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big