Com-Central.net

the_shadock

new PDF published today :

http://the.shadock.free.fr/Surviving_Grizzlys.pdf

P-O

Dontos

Joe

I still have some of my photos, lost the full session images to a crashed hard drive. Cool

Guess I need to cruise down to Valley Station.... Confused

Regards
Don

bsmart

- Joe_D

Bob,

Great story, I actually have a real one similar to that dealing with a training device in Korea. The dreaded "TWGSS"

Well I'll admit to making some guesses but I figured an armor maintenance shop can't be much different than a fighter maintenance unit.

And I've seen some strange things (including a baby blue non-flyable F-15 that disappeared from Langley AFB and wasn't even missed for several days Rolling Eyes

Neil_Baumgardner

According to my info, "SN identified by Don Moriarty (AFV News Discussion Board, 9/2007)." Wink

Neil

Joe_D

Neil,

I checked out my pictures of her. SN 5934 is her original number that's stamped on the right front upper hull. Looking at all my pictures I see no other numbers, and I'm pretty sure if there were I would have recorded them. I seriously doubt she'd have a rebuild number since the hull has not been upgraded and is still pretty much a plain M48A1 model. The only mods I've seen were the Dozer kit attachments and the removal of the track tension idler, neither would get her a rebuild SN. Curious where you got that number.

Valley Station "Franken-Tank"

Serial Number

"Buford"

Bob,

Great story, I actually have a real one similar to that dealing with a training device in Korea. The dreaded "TWGSS" Mad

Massimo_Foti

Well we have nicknamed the M48 with an M60A2 the 'Frankentank' so what do we call an M60A2 with an M48 turret??

Frankentank Junior Laughing

Massimo

Neil_Baumgardner

- Joe_D

SN 5934 (M48A5 hull with M60A2 turret) VFW Post 1181, Valley Station, KY

The SN for her is for an M48A1 hull, which is correct since that's what she is.

Joe, actually I also have a rebuild SN 923B for this one?

Neil

bsmart

- Joe_D

Neil,

SN 4494 (M48A5E1 Patton) Richardson Motor Pool Patton Museum Annex, Fort Knox, KY

This one retains her original SN, That's because she's a one off using an M60A2 hull with M48A5 turret.

SN 5934 (M48A5 hull with M60A2 turret) VFW Post 1181, Valley Station, KY

The SN for her is for an M48A1 hull, which is correct since that's what she is.

Well we have nicknamed the M48 with an M60A2 the 'Frankentank' so what do we call an M60A2 with an M48 turret??

And I think we have the key to the whole Frankentank story -

A 2LT got confused in the shop one morning and didn't listen to his sergeant
[A Friday morning the 2LT comes back form officers call where he has found out what was supposed to be a routine friday has suddenly changed]
2LT - Sergeant we need at least one of those two tanks put back together right away. The colonel has decided that he wants a platoon of tanks in the background for the press conference with the congressman who is coming to visit this afternoon

Sergeant - But sir the M48 hull is still being worked on and the M60A2 turret still has problems

2LT - So put the gun turret on the M60 hull and we'll park it in the back of the picture. No one will really notice.

Sergeant - But sir?!?!

2LT - Sergeant The Colonel thinks it's important and I'm not going to disappoint the Colonel. we'll fix it next week

1 PM - Advance man for congresscritter shows up to make sure site is ready for 4 PM press conference

Adv Man - We can't have 5 tanks in the background it isn't balanced. I need another tank to balance the picture here in an hour. Colonel you realize how important this photo op is for the Congressmans support of the Defense Budget? And that includes the approval of the new general Officers list.

Colonel - Lieutenant get another tank over here NOW

2 LT - But Sir ---

Col - No but's lieutenant get your section to put a deadline tank here if you have to but get one over here

2LT running to phone to call the shop - Sergeant get the M60A2 turret on the M48 Hull and get it over to the parade ground in the next hour.

Sergeant - But Sir ---

2 LT - No buts sergeant we only need it for a photo op this afternoon - The colonel thinks it's important and I won't let him down and I know you won't let me down [hangs up the phone]

an hour later a 'Frankentank' is delivered on a transporter and gently unloaded to make sure the turret doesn't move

Next Monday other priorities get in the way and the two monstrosities are left in the back row of the maintenance yard. A month later the sergeant retires. a week after that the lieutenant rotates to a staff assignment. No one else wants to take a chance on undoing what was obviously a secret test modification until they find the documentation.

The rest as they say is history Mr. Green

Joe_D

Neil,

I was curious about your A5 list of SN's and looked at it again. This is what I got:

SN 2872 Veterans' Memorial Park, Ooltewah, TN

That's the M48A1 SN. The A5 number is A1056C. I didn't recognize the location at first. I have her at College Park TN just down the road from the Little Debbie Snack Cake Bakery, 35.062555,-85.069135.

SN 4494 (M48A5E1 Patton) Richardson Motor Pool Patton Museum Annex, Fort Knox, KY

This one retains her original SN, That's because she's a one off using an M60A2 hull with M48A5 turret.

SN 5934 (M48A5 hull with M60A2 turret) VFW Post 1181, Valley Station, KY

The SN for her is for an M48A1 hull, which is correct since that's what she is.

Can't comment on the other two since I haven't seen them. I willing to bet the SN's were copied wrong or they aren't A5's.

Similar to M60A3s, do the SNs without an A signify "new build" (as opposed to upgraded) A5s?

By the end of 1959 all new production of M48's ceased and M60 commenced. Turret and hull castings were no longer available for new production. All A3's and A5's were made from what was originally M48/A1/A2 hulls and turrets. US models using A1 and A3 models for tanks and later some A2's for AVLB's. So no technically, no "New" A5's were made, although you can argue that they were new tanks since all that really remained was the hull and turret casting from the A1's, everything else inside and out being removed and replaced with newer components. Anniston and Red River did a lot of A3 conversions along with BMY. Then Anniston made all the A5's from these and A1's. "A" being Anniston build. No idea why it was later moved to the end of the SN with M60A3 production.

Michel_Krauss

Hi folks,

I don't have an picture of the idler mounting, so I can not say what version the original might have been

However I was planning to go back to the museum in about one month, so I could check (if I don't forget)
They are rebuilding an International Harvester M-1-4 1/2 ton truck and I want to check how it looks like when finished

Michel

Joe_D

Yep,

M48A2 converted from US supplied kits. Although to be 100% sure she was an A2, you need to see the idler mounting lug on the hull. She still could be an A1 convert where they removed the 2nd and 4th support roller (can't tell from the picture).

M48 and M48A1 idler mount (This is from an A1)

M48A2, notice how much further the mount extends from the hull and the off set adjusting link mount. This was done to correct a weakness discovered during testing and was applied to the A2 hull castings.
[img]http://com-central.net/modules/coppermine/albums/userpics/10605/normal_m48a2%7E0.jpg[/img]

M48A3, which were made by converting old M48A1's. An adapter lug was welded to the hull during the conversion. Also found on A5's, since they were made by converting A1's and A3's.
[img]http://com-central.net/modules/coppermine/albums/userpics/10605/normal_m48a3%7E0.jpg[/img]

M48A5.

This lug was also used on the M103 series when upgraded to A1/A2 standard, since She also suffered from the same design defect as the early M48's.

Hope this helps

JimWeb

Its an M48A5T2... ex-turkish army.

Michel_Krauss

Hi folks,

got some picture's to show of the M48
If you have figured it out, let me know

There are no plates on the tank, so I can not tell you what is the country of origin

Michel

Michel_Krauss

Got to see more pictures of her to tell

I can help out with that part

Will upload some picture's of the tank

Concerning the version of the M48, I don't know if this is correct

Some of the forum experts told me that it was an M48A5 version,
because of some thingy some where.... Confused

That was before the "BIG BLACK-OUT"

I was not even sure if it was an M48...

Michel

Joe_D

IAW the TM all the SN's for M48A5's start with an "A".

New numbers assigned when converted from A1's and A3's. That number doesn't look right either. Normally they are stamped top to bottom of the lug, not across or that high. I'm wondering if this one started off as an A2 with the German Army and was converted to A5 standards by them. A good indicator would be the front hull mount for the compensating idlers. If she didn't have the adapter mount welded on when upgraded to A5 then she started life as an A2 and most likely was from Germany. Got to see more pictures of her to tell.

Com-Central.net

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big