Com-Central.net

M43 8in SP for Mr. Tencza...
The AFV ASSOCIATION was formed in 1964 to support the thoughts and research of all those interested in Armored Fighting Vehicles and related topics, such as AFV drawings. The emphasis has always been on sharing information and communicating with other members of similar interests; e.g. German armor, Japanese AFVs, or whatever.
Go to page 1, 2 Next

Forum Index › AFV News Discussion Board

View previous topic :: View next topic

Author

Message

SFC_Jeff_Button
Power User

Offline
Joined: Jan 24, 2006
Posts: 1311
Location: Ft Hood, TX

Posted: Wed Aug 09, 2006 10:16 pm
Post subject: M43 8in SP for Mr. Tencza...

I recieved a request from Mr. Tencza for the M43 at the 1st Cav museum. This vehicle sits out at ther corner of the museum, by the parking lot entrance. A very nice looking piece. I found that it could throw a 95lb projectile, 25,175 meters. Below are some specific's I put together from two different sites. I didn't get the plaque in front of the vehicle, for some reason it just didn't turn out. I did contact both museum directors here and both seemed pleased to get my assistance. I'm meeting with the 1st Cav director this Friday and the 4th ID director will e-mail me information so I can pass it along here and use it for research. I told ehr that the M5 Stuart had been in Canada and possibly the Portugeese military, she said that was possible, but she believed it was found in Kansas?! Hopefully I'll find out as I do more research. She even agreed to let me into vehicles if possible to get pictures and info from data plates, I would just need an escort by some one on the staff.

1945- U.S.A. M43 8" Howitzer Motor Carriage
Armament: 1 -M1 8" howitzer
Armor: 32mm - 100mm
Engine: Continental, R975-C4, 9 cyl., radial, gas, 395 hp
Speed: 24 mph
Range: 100 miles
Crew: 8
Weight: 41 tons
The M1 155mm gun (towed) shared its carriage with the 8" howitzer. The barrels could be changed quite easily. Therefore, when the M40 SP 155mm gun was developed, it was logical to mount an 8" howitzer on the same carriage. In November 1945, a design was standardized as the M43. There was to be 576 ordered, but only 48 were built of which 24 were conversions of the T83's 155mm. The components of the M4 tank were used with HVSS suspension. There was a shield for the gun, but no cover was provided for the crew. They remained in service until the 1950s, being used in Korea.

_________________
SFC Jeff Button "High Angle Hell"

bsmart
Power User

Offline
Joined: Jan 23, 2006
Posts: 2523
Location: Central Maryland

Posted: Wed Aug 09, 2006 10:31 pm Post subject: Re: M43 8in SP for Mr. Tencza...
Only a 95 lb projectile? That seems light for an 8" round. My 'British and American Artillery of World War Two' by Ian Hogg says the 155mm gun round was 95 lb. The 8" HE round was 200 lb. _________________ Bob Smart ([email protected])

Doug_Kibbey
Power User

Offline
Joined: Jan 23, 2006
Posts: 4678
Location: The Great Satan

Posted: Wed Aug 09, 2006 10:40 pm Post subject: Re: M43 8in SP for Mr. Tencza...
Very clever how you worked your mo'cycle into the pic.

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Wed Aug 09, 2006 11:37 pm Post subject: Re: M43 8in SP for Mr. Tencza...
That's certainly fair! I've been known to get my 'Stang in the pic What kind of motorcycle is it? Neil

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Wed Aug 09, 2006 11:43 pm Post subject: Re: M43 8in SP for Mr. Tencza...
BTW, not a whole lot of M43s out there that I am aware of... Just this one at Fort Hood, one at an American Legion Post in Grand Rapids, MI, and thats it! Maybe Fort Sill has one too? Neil

Doug_Kibbey
Power User

Offline
Joined: Jan 23, 2006
Posts: 4678
Location: The Great Satan

Posted: Wed Aug 09, 2006 11:53 pm Post subject: Re: M43 8in SP for Mr. Tencza...
- Neil_Baumgardner That's certainly fair! I've been known to get my 'Stang in the pic What kind of motorcycle is it? Neil Oooh, Ooooh! I know that one! 50th Anniversary Sportster. Neil, we two or three whole threads devoted to the gearhead among us. Been slow lately, but it's in Officer's Club a way's back. (Me have 'Stang, too!)

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Thu Aug 10, 2006 12:01 am Post subject: Re: M43 8in SP for Mr. Tencza...
Yeah, I'm not actually much of a gearhead. Mustangs are in my blood - both my father & mother had 'em (technically his was a T5 imported from Germany), and I'm on my third ('87, '96 and '06) - but I didnt quite inherit my father's mechanical abilities... The most I've ever done is replace an alternater or starter... Neil

toadmanstankpictures
Power User

Offline
Joined: Jan 24, 2006
Posts: 704

Posted: Thu Aug 10, 2006 1:08 am
Post subject: Re: M43 8in SP for Mr. Tencza...

- Neil_Baumgardner

BTW, not a whole lot of M43s out there that I am aware of...

Just this one at Fort Hood, one at an American Legion Post in Grand Rapids, MI, and thats it! Maybe Fort Sill has one too?

Neil

Does Wyoming, MI count as Grand Rapids? If so, then I have pics of that one: M43. There's also one in So. Calif. at Tankland. I think I took some pics of that one last year. I just haven't posted them on my site.

_________________
Chris "toadman" Hughes
www.toadmanstankpictures.com
www.cafepress.com/toad...ksandstuff

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Thu Aug 10, 2006 1:19 am Post subject: Re: M43 8in SP for Mr. Tencza...
Yeah, that was at American Legion Post 154? I noticed I had that one double listed for Grand Rapids & Wyoming MI. The legion post is in Grand Rapids... Tankland? I need more info! Neil

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Thu Aug 10, 2006 1:25 am Post subject: Re: M43 8in SP for Mr. Tencza...
Oh right, the "American Society of Military History" museum... I get to LA every once in a while, I need to check that place out sometime... Neil

SFC_Jeff_Button
Power User

Offline
Joined: Jan 24, 2006
Posts: 1311
Location: Ft Hood, TX

Posted: Thu Aug 10, 2006 1:40 am
Post subject: Re: M43 8in SP for Mr. Tencza...

First let me say that Doug is right, I did manage to place my bike in the picture and wondered if you pick it out, good job. However, its a 2003, "100th Anniversary", 1200 Sportster Custom. I have a Stage I Screaming Eagle kit installed and some chrome goodies like the oil tank, belt guard, headlight trim-ring, battery cover, and ignition cover. The wife bought me smoked turn signals lenses last Valentines Day. I took first place in the local Ft Irwin car and bike show in 2005 in the motorcycle catagory. It's never seen the rain, and has never been washed because I detail and wipe it down at least once a week.
With only 48 total M43's built, I would love to know where all the surviving ones are and see some pictures. If anyone has pics, please post them. Stay tuned, I will be posting many more pictures this weekend as I intend to hit the post this weekend and burn up the digital with pictures and record all the vehicles on display here on the post.

_________________
SFC Jeff Button "High Angle Hell"

TomT
Power User

Offline
Joined: Jan 27, 2006
Posts: 4

Posted: Thu Aug 10, 2006 6:19 pm Post subject: Re: M43 8in SP for Mr. Tencza...
SFC Button, Thanks for the great pictures of the rare M43. I've been searching for good photos for a long time. I would also be interested in photos of any other M43's still around. Question for Neil. What is the URL of your Web Site. I've been following your postings with photos for a long time. I will add these photos to my Web Site at my next update. TomT

oldtop
Power User

Offline
Joined: Mar 17, 2006
Posts: 70

Posted: Thu Aug 10, 2006 6:52 pm Post subject: Re: M43 8in SP for Mr. Tencza...
Yup 96lbs is the weight of a 155mm HE round (108lbs for a WP), 206lbs for a 8".

Neil_Baumgardner
Power User

Offline
Joined: Jan 24, 2006
Posts: 3942
Location: Arlington, VA

Posted: Thu Aug 10, 2006 7:55 pm
Post subject: Re: M43 8in SP for Mr. Tencza...

Tom,
I actually dont have an armor website, although I have had one in planning for years literally. Too much going on - school, travel, moving apartments, back to school.... Its on my to do list, but who knows...

However, I have been working on a "USA AFV Registry" - ie a registry of all historical monument & museum AFVs in the USA. Right now I'm just trying to get addresses down for VFWs, etc. It may be ready in a couple of weeks... Maybe...

Neil

Doug_Kibbey
Power User

Offline
Joined: Jan 23, 2006
Posts: 4678
Location: The Great Satan

Posted: Thu Aug 10, 2006 7:59 pm
Post subject: Re: M43 8in SP for Mr. Tencza...

- Neil_Baumgardner

Tom,
I actually dont have an armor website, although I have had one in planning for years literally. Too much going on - school, travel, moving apartments, back to school.... Its on my to do list, but who knows...

Yes you do...it's here!

However, I have been working on a "USA AFV Registry" - ie a registry of all historical monument & museum AFVs in the USA. Right now I'm just trying to get addresses down for VFWs, etc. It may be ready in a couple of weeks... Maybe...

Neil

And we'll be ready when you are.

Forum Index › AFV News Discussion Board
Page 1 of 2

All times are GMT - 6 Hours
Go to page 1, 2 Next

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big