Com-Central.net

Forum FAQ

Moderators

Cougar update.
A public forum for the JG300 Wild Sau Gruppe!
Go to page 1, 2, 3 Next

Forum Index › JG300 Wild Sau Gruppe Public Forum

View previous topic :: View next topic

Author

Message

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Sun Jun 28, 2015 2:44 am
Post subject: Cougar update.

Have done a few things since the last update, now that I have an income again. Wink

New plug wires, distributor cap, coil, belts, hoses, HV oil pump, Motorcraft oil sending unit, water pump, thermostat, radiator, harmonic balancer, ditched the flex fan for the stock clutch fan and new carb.

While tearing it apart spun the old waterpump shaft and noticed a wobble. since replacing that and the Harmonic balancer (still had original with chunks of the hardened rubber missing) the harmonic vibration at cruise is gone and she runs smooth a silk. The Edelbrock Perfomer carb (w/mechanical secondaries) that I put on new about 20 years ago was giving me grief. I rebuilt it, tried changing jets/rods/springs, etc. but it wouldn't run the same way twice and was leaving black splatter on my garage floor. Started looking online and discovered ideally you want a carb with vacuum secondaries on an auto trans. so I dropped the money and replaced it with an Edelbrock Thunder series AVS. Man what a difference. No more black marks on the garage floor, when you get on it you can feel yourself being put back in the seat and I've gone from 10 MPG to 16.

Now it runs so good I've been driving it at least 3 days a week to work and want more but...The last 3 weeks (and the ten day forecast) in the beautiful Antelope valley where I work has been 100 plus degrees. The drives in the Morning are sweet, after work miserable. So the last thing on the list to do (AC) has become the next. Laughing

have this ordered.

www.classicautoair.com...ngine.html

Also have some nice Cougar valve covers that I'll throw on when doing the AC.

Will post pics when the work begins.

_________________

JG300-Stoopy
Power User

Offline
Joined: Jan 05, 2005
Posts: 5840
Location: Group W bench

Posted: Sun Jun 28, 2015 12:31 pm Post subject: Re: Cougar update.
Awesome! The A/C compressor looks way lighter and more efficient than the ugly old stock anvil-like unit that pretty much visually dominates the engine compartment. That's gonna be sweet. _________________ "Once your reputation is ruined, you can live quite freely."

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Thu Jul 02, 2015 2:18 am Post subject: Re: Cougar update.
Here's one of the valve covers installed. Will be doing the other tomorrow after work and the new A/C parts will be this weekends project. _________________ Last edited by JG300-fr8ycat on Mon Jul 06, 2015 2:49 am; edited 1 time in total

JG300-Ascout
Power User

Offline
Joined: Jan 05, 2005
Posts: 6257
Location: Cyberspace

Posted: Sun Jul 05, 2015 1:49 am Post subject: Re: Cougar update.
Suuuu-weeeeeet! _________________ "All facts go to clearly prove that Shades is a thrice-cursed traitor & mentally deranged person steeped in inveterate enmity toward mankind"

JG300-Stoopy
Power User

Offline
Joined: Jan 05, 2005
Posts: 5840
Location: Group W bench

Posted: Sun Jul 05, 2015 12:24 pm Post subject: Re: Cougar update.
Very nice!!!!! Is that a fuel pressure gauge I see on the fuel line between the fuel filter and your new carb? Looks like a happy 289!!! _________________ "Once your reputation is ruined, you can live quite freely."

JG300-Ascout
Power User

Offline
Joined: Jan 05, 2005
Posts: 6257
Location: Cyberspace

Posted: Mon Jul 06, 2015 12:03 am Post subject: Re: Cougar update.
- JG300-Stoopy Very nice!!!!! Is that a fuel pressure gauge I see on the fuel line between the fuel filter and your new carb? Looks like a happy 289!!! ...or 302. depending on how stock he went. 302 will give him a few more options. _________________ "All facts go to clearly prove that Shades is a thrice-cursed traitor & mentally deranged person steeped in inveterate enmity toward mankind"

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Mon Jul 06, 2015 2:43 am
Post subject: Re: Cougar update.

- JG300-Stoopy

Very nice!!!!!

Is that a fuel pressure gauge I see on the fuel line between the fuel filter and your new carb?

Looks like a happy 289!!!

That's a pressure regulator. Edelbrocks don't typically like anything above 6 PSI and even though I have a stock (repro) fuel pump that's supposed to be putting out 7, it's actually putting out 9.

It is the stock 302 which came with a 4bl carb and the edelbrock performer intake that I put on about 20 years ago. Couple weeks back I found a piece of paper that I wrote the mileage on when I had the motor rebuilt and discovered I only have about 13k miles on the motor. Laughing

_________________

JG300-Ascout
Power User

Offline
Joined: Jan 05, 2005
Posts: 6257
Location: Cyberspace

Posted: Fri Jul 17, 2015 2:52 am
Post subject: Re: Cougar update.

- JG300-fr8ycat

- JG300-Stoopy

Very nice!!!!!

Is that a fuel pressure gauge I see on the fuel line between the fuel filter and your new carb?

Looks like a happy 289!!!

That's a pressure regulator. Edelbrocks don't typically like anything above 6 PSI and even though I have a stock (repro) fuel pump that's supposed to be putting out 7, it's actually putting out 9.

It is the stock 302 which came with a 4bl carb and the edelbrock performer intake that I put on about 20 years ago. Couple weeks back I found a piece of paper that I wrote the mileage on when I had the motor rebuilt and discovered I only have about 13k miles on the motor.

If I had one of these lying around, I'd give it to you, just because it's the right thing to do. But I don't, so I can't. Sad

www.cjponyparts.com/ho...HwoduyIOKQ

.

_________________
"All facts go to clearly prove that Shades is a thrice-cursed traitor & mentally deranged person steeped in inveterate enmity toward mankind"

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Mon Jul 20, 2015 5:17 am Post subject: Re: Cougar update.
Thanks for the offer but from past experience Holley has left a bad taste in my mouth _________________

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Tue Jul 21, 2015 2:10 am Post subject: Re: Cougar update.
Was starting to think he was full of it, just wanting to be Cool like the rest of us Cougar owners but my co-worker finally brought it in. So here's his 68 XR7. _________________

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Tue Jul 21, 2015 2:32 am Post subject: Re: Cougar update.
Currently my A/C upgrade has brought me back to this. Will explain soon. _________________

JG300-Stoopy
Power User

Offline
Joined: Jan 05, 2005
Posts: 5840
Location: Group W bench

Posted: Tue Jul 21, 2015 11:29 am Post subject: Re: Cougar update.
Wild guess (probably wrong)... did the existing water pump housing not have the right mounting points for the A/C bracketry? _________________ "Once your reputation is ruined, you can live quite freely."

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Wed Jul 22, 2015 1:46 am
Post subject: Re: Cougar update.

- JG300-Stoopy

Wild guess (probably wrong)... did the existing water pump housing not have the right mounting points for the A/C bracketry?

Very close and I'll give you full credit anyways Laughing

The mounting points were fine, it was the thickness of those points that were off. When I bought and installed that water pump a couple months back i ran into a problem with the power steering bracket rocking back and forth on one of the "spines" (for lack of a better term), the bracket wasn't sitting flush with the bolt holes on the water pump.

Mistake #1 "I'll make it fit", filed down the spine so it was out of the way and it all worked. Since I had removed all the A/C equipment under the hood I was none the wiser about what would happen when I tried to reinstall the A/C and since it was "last on the list", that would be a few years down the road. Rolling Eyes

Mistake #2, when I installed that water pump one of the attaching bolts was stripped. "Well, it was that way before and there were no leaks so I'll leave it". Now that I am having to redo it all it's something I should have fixed but didn't and now it's getting fixed, that's why the timing gear cover is removed.

Also discovered that I'm missing a fixed pulley. Know I had it in the past but removed it since the A/C wasn't working and have no idea what happened to it. Found an NOS place in NY, $65 and it's now in my garage. There's also washers (3 total) that go between the adjustable pulley bracket and the water pump that I don't have. AMK in VA has classic car bolt kits with the original style bolts and washers which should be arriving tomorrow.

_________________

JG300-Ascout
Power User

Offline
Joined: Jan 05, 2005
Posts: 6257
Location: Cyberspace

Posted: Wed Jul 22, 2015 2:56 am
Post subject: Re: Cougar update.

- JG300-fr8ycat

Mistake #2, when I installed that water pump one of the attaching bolts was stripped. "Well, it was that way before and there were no leaks so I'll leave it". Now that I am having to redo it all it's something I should have fixed but didn't and now it's getting fixed, that's why the timing gear cover is removed.

HeliCoil or drill out and tap to larger thread?

_________________
"All facts go to clearly prove that Shades is a thrice-cursed traitor & mentally deranged person steeped in inveterate enmity toward mankind"

JG300-fr8ycat
Power User

Offline
Joined: Mar 13, 2005
Posts: 1528
Location: Los Angeles

Posted: Thu Jul 23, 2015 1:25 am Post subject: Re: Cougar update.
HeliCoil. Dropping it off at the machine shop tomorrow. Bolts and washers came today. Will keep the originals even though they are well rusted but looks like the bolt that was in the stripped threads was incorrect, longer than what should have been the stock bolt. _________________

Forum Index › JG300 Wild Sau Gruppe Public Forum
Page 1 of 3

All times are GMT - 6 Hours
Go to page 1, 2, 3 Next

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big