Com-Central.net

Joe_D · Posted: Tue May 02, 2006 3:49 am Post subject: M60 AVLB

This is what happens when you keep a camera around.
Bunch of these came in to McCoy, Got a chance to get some very detailed pictures. Especially the top which is usually hidden by the bridge. These are still in service, and probably will be for some time with all the cutbacks. The M60 Lives on.

Joe D

MarkHolloway · Posted: Tue May 02, 2006 6:57 am Post subject: Re: M60 AVLB

We weren't allowed cameras but they rebuild those at Anniston Army Depot. Wish I could have shot some pictures there. I think they were afraid that photos might tip off foreign governments of our industrial capabilities there.

Roy_A_Lingle · Posted: Tue May 02, 2006 2:08 pm Post subject: Re: M60 AVLB

Hi Joe D! Hi Folks!

Thanks for the photo!

Any idea what that panel is on the rear end of the closest vehicle is?
I have not seen anything like that on a AVLB carrier.

Sgt, Scouts Out! Smile

JimWeb · Posted: Tue May 02, 2006 4:00 pm Post subject: Re: M60 AVLB

Take a look at the Hull... wasn't that originally an early production M60A2?

Cool

Roy_A_Lingle · Posted: Tue May 02, 2006 6:28 pm Post subject: Re: M60 AVLB

Hi Jim! Hi Folks!

- JimWeb

Take a look at the Hull... wasn't that originally an early production M60A2?

As far as I know, the only thing on the hull that will tell us it is an ex-M60A2 is if it has a CBSS bulge under the rear grill doors.

Do you know of another item that can be seen from the side or top?

Sgt, Scouts Out! Smile

Joe_D · Posted: Tue May 02, 2006 6:42 pm Post subject: Re: M60 AVLB

Jim,
No, this one is an original M60A1 AVLB, or in this case an AVLM. That's why it has the second brace that crosses the rear deck. It would carry 2 MCLIC (Mine Clearing Line Charge) on the back. Three ways to tell the difference between A1 and A2 chassis. The A2 hull would have the turret opening machined to take the race ring, the driver's hatch and vision blocks plugged, and last and most obvious was the CBSS bulge.

Roy,
The panels I think you are reffering to are upside down mud flaps attached to the rear fender brace. Some while back some soldier got tired of all the desert dust that kicks up and get's sucked under the bridge when it's carried. So he put those mud flaps there to block it. Pretty smart. Now it's a common sight.

Joe D

JimWeb · Posted: Tue May 02, 2006 10:14 pm Post subject: Re: M60 AVLB

I was going by the number of 'eyes' welded to the hull sides...

Cool

SFC_Jeff_Button · Posted: Wed Feb 28, 2007 5:20 pm Post subject: Re: M60 AVLB

I just recently asked about AVLB's and while searching our old pages I came across this from last May. So I guess there are M60A2's converted to AVLB's. This might be one for the "Sticky", as far as how two distinguish the two types for proper ID.

Doug_Kibbey · Posted: Wed Feb 28, 2007 5:34 pm Post subject: Re: M60 AVLB

- Joe_D

Jim,
No, this one is an original M60A1 AVLB, or in this case an AVLM. That's why it has the second brace that crosses the rear deck. It would carry 2 MCLIC (Mine Clearing Line Charge) on the back. Three ways to tell the difference between A1 and A2 chassis. The A2 hull would have the turret opening machined to take the race ring, the driver's hatch and vision blocks plugged, and last and most obvious was the CBSS bulge.

Roy,
The panels I think you are reffering to are upside down mud flaps attached to the rear fender brace. Some while back some soldier got tired of all the desert dust that kicks up and get's sucked under the bridge when it's carried. So he put those mud flaps there to block it. Pretty smart. Now it's a common sight.

Joe D

Thanks, Joe...

It's your pics that I mistakenly attributed to Bob in the other poste where I mentioned the "welded up bits"...I recalled seeing the plugged driver's hatch welds somewhere previously. The CBSS bulge is obvious, but since some early M60A1E2 hulls wouldn't have this (and I'm not sure they might not have been converted also) I wasn't sure if it should be a rule-in/out criteria.

This might be one for the "Sticky", as far as how two distinguish the two types for proper ID.

Jeff,
Bob and I were just discussing "sticky" threads today...and in the interest of limiting "clutter" and having sticky threads retain their impact, we really want to limit the number of sticky's to the bare minimum. Something like this I suggest doing as I just did....save that sucker to your favorite picture file for future reference. Wink

D.

Neil_Baumgardner · Posted: Wed Feb 28, 2007 6:00 pm Post subject: Re: M60 AVLB

Right... Right now I for one would like to restrict the current sticky to just SNs. If we start doing ID guides for every vehicle, well.... You get the idea...

Neil

Doug_Kibbey · Posted: Wed Feb 28, 2007 6:05 pm Post subject: Re: M60 AVLB

- Neil_Baumgardner

Right... Right now I for one would like to restrict the current sticky to just SNs. If we start doing ID guides for every vehicle, well.... You get the idea...

Neil

Actually, in that vein, I'd like to see us soon making better use of the under-utilized "downloads" section available to us. The AFV forum is presently only represented by three downloads vs. lots more for the other C-C activities and this could be done a lot better. Since certain individuals have taken obvious leadership roles in assembling these valuable lists (*ahem*) I'm sure the admins would offer every assistance in helping with any transition to that format and then updates and downloads by members would soon become routine. Wink

Neil_Baumgardner · Posted: Wed Feb 28, 2007 6:14 pm Post subject: Re: M60 AVLB

Okay, I get the hint... My only possible objection is that non-users (ie general public) cannot access the downloads section. Thats why we shifted the register to ftp... Of course I could do the same for SNs, just putting it an pdf... But we'd still need a sticky for the link...

Neil

Doug_Kibbey · Posted: Wed Feb 28, 2007 6:21 pm Post subject: Re: M60 AVLB

- Neil_Baumgardner

Okay, I get the hint... My only possible objection is that non-users (ie general public) cannot access the downloads section. Thats why we shifted the register to ftp... Of course I could do the same for SNs, just putting it an pdf... But we'd still need a sticky for the link...

Neil

That works too, we could have a "general purpose" sticky with a list of links to the the ftp linky's for each item all in one post with an item descriptor. Sounds like a capitol idea there! Good thinkin'....see what I meant about those "leadership roles"?

MarkHolloway · Posted: Thu Mar 01, 2007 12:40 am Post subject: Re: M60 AVLB

I spent all day chaining M60A1 AVLB's to flatcars. Six of them headed to Anniston.

Com-Central.net

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big