Com-Central.net

T26E4 · ***Power User*** Offline Joined: Apr 14, 2006 Posts: 42

Howdy everyone. I posted this thread over on Missing-Lynx to try to explain how the damage was sustained on these two Soviet Lend Lease M4A2s. Any thoughts?

www.network54.com/Foru...mor-+M4A2s

MarkHolloway

I'm stumped! Can't even guess! Neutral

JimWeb

WE have discussed this before. Its shipping damage probably caused by the cargo shifting during a storm - more common than you would think apparently. The dings are the same distance apart as something in the side of a liberty ship hold.

Cool

Maple_Leaf_Eh · ***Power User*** Offline Joined: Jan 24, 2006 Posts: 517

I'd hate to see the hold of the Liberty ship after 35-odd tons of Sherman cannonballed around a few times.

In the late 1980's I worked in a Canadian Forces office that had technical manuals for all sorts of things. One was how to load ships. I was surprised to see diagrams of conventional through-deck loading techniques of what sure looked like a Liberty Ship. The CF had not had much experience loading ships in serving memory; things sure changed with the Balkans rotations.

Later I met a man I knew as a British exchange officer who resigned and came straight into the CF at the same rank and approximate seniority. He explained that specialists who had a skill not held by a Canadian could do what he'd done. His was loading ships.

Roy_A_Lingle

Hi Jim! Hi Folks!

- JimWeb

Its shipping damage probably caused by the cargo shifting during a storm - more common than you would think apparently. The dings are the same distance apart as something in the side of a liberty ship hold.

I have trouble seeing a collision takening place with enough force to damage armored plate like, but yet the tank didn't punch through the side of a liberty ship. Liberty ships had a problem with hulls that were too weak to withstand heavy storms. A number of them broke in half and sank because of that weakness.

I have no idea what cause that, but I for one, have trouble buying it was caused by hitting the side of a cargo ship during a storm.
Sgt, Scouts Out!

SFC_Jeff_Button

I have to agree with Roy on this one. Most Liberty ships were built to withstand pressure / contact from the outside, not the inside. I can believe the ship would sustain damage but to dent a tank, seems very unlikely and unbelievable. I would love to see this tank in person. Looking at the road wheels, it looks "pieced" together at best.
This VVSS Sherman seems to have the 75mm gun, no pistol port, and early small "weep" (drain) holes at the rear of the turret splash guard. Having looked at the pictures on the site you list, I can tell it's a Chrysler build by the front "half round fill weld piece" over the diff's.
My guess is much of this tank is "cobbeled: together with various parts and steel plating. There are no vents over the engine compartment, and there is a hollow opening in the rear of each upper rear deck area, one of which appears ripped open, (see additional photo's). I'd like to know the serial number, (I'm sure Kurt Laughlin and Joe DeMarco would like to know as well.

JimWeb

- Roy_A_Lingle

I have trouble seeing a collision takening place with enough force to damage armored plate like, but yet the tank didn't punch through the side of a liberty ship. Liberty ships had a problem with hulls that were too weak to withstand heavy storms. A number of them broke in half and sank because of that weakness.

It was the welded versions using the North Atlantic run to Murmansk that had the problem according to my tame ship guy Gibbo... if a crack started on a welded version there was nothing to stop it. The riveted versions were okay in the cold that far north (cracks stopped at the edge of a plate) so they were mainly used on that run... The technical expression for 'things inside the hull' I was looking for was 'frames' apparently...

There is an image floating around of a Sherman being unloaded in Murmansk with similar dents... I'll get Gibbo to see if he can find it as he told me about it.

I'm almost sure we had another image of similar damage caused to a Sherman on the old board... It was parked under a tree IIRC?

Cool

Sabot

Lent it to the Mrs.?

bsmart

I remember the thread on the old board also. If I remember correctly we had pictures of more than one with similar damage. I can think of some other scenarios during shipment that could cause such damage.

An improperly secured tank hitting other heavy cargo (Such as large steel plates being shipped) or the other cargo shifting and hitting a properly secured tank (anything very heavy with sharp edges) A railroad derailment which sent the tank down an embankment into large boulders seems a possibility.

Of course the damage could have occured later in the tanks life such as being pushed out of the way after being damaged and having other equipment pushed into it but I vaguely remember pictures of tanks being unloaded with similar damage at a port

JimWeb

- Sabot

Lent it to the Mrs.?

LOL

piney

just thinking out loud here but the dents do seem very regular, I'm wondering if it might have been off loaded with some sort of a claw device rather then cables? sort of like a crane vending machine but waay bigger.

Jeff Lewis

Claymore · ***Power User*** Offline Joined: Jan 27, 2006 Posts: 6

Guys, I think Ive figured it out. This sherman looks like it's been restored from a wreck. Could it be that the side armour was missing/damaged and has been replaced with mild steel or aluminium cut to shape and welded in place. It would be very easy to damage or dent. The texture of the surface does not look like any rolled armour plate i've ever seen, but it does look like a sheet of aluminium.

T26E4 · ***Power User*** Offline Joined: Apr 14, 2006 Posts: 42

Claymore: If you note, I've cited TWO separate tanks with the same indentations. Over on ML, the "replaced side walls" theory has been bandied about as well. However, I tend to doubt it because if you look carefully at the dented walls' weld seams, they look intact and there's no indication of a replacement milder steel sidewall.

Also I've seen very smooth hull walls. Look at this post:

www.network54.com/Foru...179785806/

See the M4A3? Smooth too.

MarkHolloway

Where's Hanno? He's got to have a theory!

JimWeb

Here is the one under the tree...

Com-Central.net

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big