Com-Central.net

JimWeb · Posted: Thu Jan 28, 2010 9:39 am Post subject: Re: Cobra King (reposted updates)

Well done Don - keep going!

Dontos

Here is a composite of images from yesterdays work session.

Being involved with so many different sub-projects, its a bit hard to report a lack of discovery with any sort of 'excitement'.

Progress has been a bit slower with seasonal illnesses & weather conditions but armed with a 'plan', it continues gradually.

Regards
Don

Dontos · Posted: Sun Feb 07, 2010 2:43 am Post subject: Re: Cobra King (reposted updates)

A little bit of work of note on Cobra King completed today.

Work centered in removing the remaining bogie assemblies. 3 are now close to removal with some difficult mounting bolts.

Previously Cobra King was lifted higher on the 'dolly' to allow access to the lower (hull) mounting bolts on the bogie assemblies. Additionally the support rollers and 'skid' were removed from the remaining assemblies.

Here is a composite of a few photos from today.

Regards
Don

the_shadock

I know how difficult it is to remove bogie bolts and nuts..

I helped to remove, repaint and reassemble them all on this particular tank :

Paradoxally, that was a real pain, but a nice one !!!

P-O

Dontos · Posted: Sun Feb 14, 2010 2:48 am Post subject: Re: Cobra King (reposted updates)

Hey all

I've been stuck at home, nursing a crushed finger. (...perhaps due to the fact I'm a little too 'hands on' while at work ?? Rolling Eyes

)

Anyway, I finished another Cobra King related video that I thought some might be interested in.

On The Trail of Cobra King (Part 1)

Enjoy
Don

Dontos · Posted: Thu Feb 25, 2010 2:08 am Post subject: Re: Cobra King (reposted updates)

I finally got off my 'lazy butt' and was able to spend a few hours in the Motor Pool on CK.

I started to remove the layers of paint in the area of the #3 Left side bogie assembly, along the hull wall. Using the proven worth of the 'Garry Redmon proess' of paint removal, I began 'tapping' the hull with a ballpeen hammer.

Some near immediate items of interest came to my attention.

More production stampings were uncovered on the hull.

I also uncovered a 'black substance' that is not paint but appears to be some sort of 'soot' residue. (LET THE SPECULATIONS BEGIN......AGAIN) Wink

Just thought I'd keep y'all informed.

Regards
Don

Garry_Redmon · Posted: Fri Feb 26, 2010 1:38 am Post subject: Re: Cobra King (reposted updates)

The Cobra King section on Armor for the Ages has been updated with new photos and new discoveries, some of which Don has already mentioned.

armorfortheages.com/Vo...ctPage.htm

Garry

Dontos · Posted: Fri Feb 26, 2010 2:24 am Post subject: Re: Cobra King (reposted updates)

Garry

THATS GREAT !! It Figures, I had to leave early and miss the really cool stuff. 'Congrats' on the find !!

Updates are excellent as always

Regards
Don

Garry_Redmon · Posted: Fri Feb 26, 2010 5:14 am Post subject: Re: Cobra King (reposted updates)

Charles gets credit on the initial find. I get the points for the gouge, dent and finding the hole in the overhang. Smile

What amazes me is that we have gone over her many times, but we keep finding things. What will be next?

Garry

Michel_Krauss · Posted: Fri Feb 26, 2010 6:32 pm Post subject: Re: Cobra King (reposted updates)

Hi folks,

just an small question about the stamps you have found on the plates

Are these stamps to ID steel manufactures, or are they corresponding with material certificates, or the guy(s) / girl(s) who did the welding, or something else ?????

Michel

Dontos

Due to an unexpected day off from work, I decided to spend the day in the MP & condinuing paint removal.

With the stamped production numbers on the hulls left side, I located and uncovered additional stamped production numbers on a similiar loation on the hulls right side. (photos to follow)

It was then that I started to remove the thick layers of paint around the welded 'rebar' remains on the right side. This is when I stumbled onto another interesting 'rediscovery'. I found what I initially believe was the original brush painted stencil of the RN on the right side.

After exposing the entire number, it became appearent that it was perhaps not the first RN stencil, however it maybe the first 'post-operational' applied RN.

Then the REALLY BIG NEWS ...!!!

I have uncovered the original stencilled 'Cobra King' on the right side. Since no images exist of the right side, we've always wondered if the tanks name (as photographed in the Dec 44 image) was applied to both sides. I have found evidence to confim this!

BTW: due to the volume of photos taken today, these and other are to follow

Regards
Don

Dontos · Posted: Sat Feb 27, 2010 1:32 am Post subject: Re: Cobra King (reposted updates)

Here are some pics from today.....

Right Side Hull stamped production numbers uncovered:

Multiple Right Side brush painted RNs uncovered:

Right Side original 'Cobra King' Stencil uncovered:

close up with measuring tape:

Regards
Don

Dontos · Posted: Sat Feb 27, 2010 1:49 am Post subject: Re: Cobra King (reposted updates)

Oh

Almost forgot. This is a production stamped number that was uncovered on the right side.

Regards
Don

Garry_Redmon · Posted: Sat Feb 27, 2010 2:20 am Post subject: Re: Cobra King (reposted updates)

Those are great discoveries, Don! Well done.

Garry

TrevorLarkum

Interesting!

Com-Central.net

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big