Com-Central.net

{92}Warhawk · Posted: Thu May 19, 2005 9:58 pm Post subject: Video card/Memory questions

Hi everyone,

Well, I finally decided to get a new graphics card and add some memory to my computer. I did some research on newegg and found these 2 parts that had good prices and good performance.

www.newegg.com/Product...6814102294
www.newegg.com/Product...6820145479

I was told that the stuff on these two parts were very standard on most computers so I shouldn't have a problem. Is there anything I need to check before buying these such as my memory type and such? If so, how do I find out? I have never really bought computer parts before so I don't really know what I should be looking for. thanks..

XcalibeR · ***Power User*** Offline Joined: Mar 11, 2005 Posts: 358

Sapphire 9800 Pro... Good card. Very good choice there.

That RAM is fine to. You could also check out Kingston, OCZ, more Corsiar, or GeIL.

Any of those should do good. If you were going to go Corsair, though, I think the one I pointed to would be better. It's got a lower CAS timing, though I don't know them all. Techy lingo, but just go with me here Mr. Green

Shadow_Bshwackr · Posted: Fri May 20, 2005 5:35 am Post subject: Re: Video card/Memory questions

Both choices are great IMO. Corsair is a great choice for memory and that's the lowest price I've seen on quality PC3200 ram in a long time...:D

Not much to say about 9800 Pro other than it's top notch card and they're used by serious gamers everywhere....:wink:

Vlad · ***Power User*** Offline Joined: May 08, 2005 Posts: 21

A few things, no one answered. On the video card, I noticed there is a power connector. This may mean the card needs a direct connection to your power supply. Make sure your power supply can handle the requirements of the card and also has the extra connector for the card. The card is also 4x/8x AGP, ensure you have an AGP slot on your motherboard, and that it supports at least one of these speeds.

As for RAM, you need to research the model of your motherboard to make sure your board supports 184-Pin PC-3200 RAM. Buying the wrong type of stick is a surefire way to ruin both the RAM and possibly your motherboard. Also with RAM you should keep like with like. If your system currently has 512 megs you shouold be fine as long as both sticks are PC-3200, if one is 256 PC-3200 it will not hurt, but it will not perform as well as you think. I have had issues where when I ran a 128 meg stick with a 256 meg stick I noticed a significant performace decrease, as opposed to running the 256 meg stick alone.

Otherwise the parts you have selected are decent, it really comes down to a matter of preference and whether you are willing to sacrifice a few seconds or a few volts for value over performance. When it boils down to it, the average user cannot tell the difference in game between a 380 MHz core clock and a 500 MHz.

If this is your first parts upgrade, remember all you are doing is changing parts, nothing more, nothing magical or mysterious about it. You can customize it to your liking and have the screaming system you always wanted at $100's or even $1000's less than what most manufacturers offer. The downside is no tech support comes with it. The upside is, if a component does go bad, you won't drop $1000's for a new machine, only a few hundred for the new part, which usually is better than the one it is replacing.

RCAF_MadDog · ***Janitor*** Offline Joined: Nov 13, 2004 Posts: 849

Found this:

ADDITIONAL POWER CONNECTION REQUIREMENTS
www.sapphiretech.com/v...proult.asp

The Radeon 9800 Pro must be connected to the computer? power supply to meet its performance and high-speed memory requirements.
In order to supply the ATI Graphics Accelerator card with the necessary power, we have included the Power Extension Cable.
Use the Power Extension Cable to connect the Radeon 9800Pro to the computer hard drive power connector.

But I wouldnt run it off the same one going to a hard drive, I would run it off the CD power Wire if you cant find one not being used.

JG27_Tanker · ***Power User*** Offline Joined: Feb 16, 2005 Posts: 131

I unplugged the power from my old ZIP drive and used it to power my 9700 Pro.

JG300-Hoppa · Posted: Tue Jun 14, 2005 8:39 pm Post subject: Re: Video card/Memory questions

about the whole power issue,,,,I just said "bah",,,,so bought the best one that was recommended to me as to run all my hardware upgrades and tower mods/(lotsa lights and fans)......went with a 480 antec and am very pleased,,,,is worth the few extra pennies I figure Mr. Green

CrashEd · Posted: Tue Jun 14, 2005 9:20 pm Post subject: Re: Video card/Memory questions

I got a 400 antec and i really like it plenty of power for me. Mr. Green

Com-Central.net

Select Language

Login

`±`Recent Visitors

`±`User Info-big

Archive Revive
Username:
This is an archived topic - your reply will not be appended here. Instead, a new topic will be generated in the active forum. The new topic will provide a reference link to this archived topic.

Com-Central.net

Select Language

Login

±Recent Visitors

±User Info-big

`±`Recent Visitors

`±`User Info-big